UCD-IPT00-XXXXX-AAB0-2TW

 

Interface
Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs
Output Driver RS 422 (TTL)
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) – +80 °C (+176 °F)
Humidity 98% RH, no condensation
Mechanical Data
Mechanical Data
Housing Material Steel
Housing Coating Zinc Plated
Flange Type Blind Hollow, ø 36 mm (A)
Flange Material Aluminum
Shaft Type Blind Hollow, Depth = 18 mm
Shaft Diameter ø 10 mm (0.39″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 6000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 50,2 mm (1.98″)
Weight 405 g (0.89 lb)
Maximum Axial / Radial Misalignment Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection
Connection Orientation Axial/Radial
Connection Type Cable / Connector
Connector Cable 2 m
Cable Length 2 m [79″]
Wire Cross Section 0.14 mm² / AWG 26
Material / Type PVC
Cable Diameter 6 mm (0.24 in)
Minimum Bend Radius 46 mm (1.81″) fixed, 61 mm (2.4″) flexing
Certification
Approval CE + cULus
Product Life Cycle
Product Life Cycle New
Connection Plan
SIGNAL CABLE COLOR
A Green
/A Yellow
B Gray
/B Pink
Z Blue
/Z Red
Power Supply Brown
GND White
Shielding Shield
Connector-View on Encoder

 

Pulse Diagram

 

Rotation Clockwise (seen on shaft)

Phần này để giới thiệu chung cho tất cả các sản phẩm