| Interface |
|
| Interface |
Programmable Analog Current (Preset + Dir) |
| Manual Functions |
Preset + complement via cable or connector |
| Configuration Tool |
UBIFAST Configuration Tool (Version ≥ 1.6.10) + Ubifast Adap |
| Video Manual |
 Watch a simple installation video |
| Programming Functions |
Measurement Range, Preset Value, Output Direction, Code |
| Electrical Data |
|
| Supply Voltage |
8 – 32 VDC |
| Current Consumption |
Typical 20 mA @24 V (no load) |
| Start-Up Time |
<500 ms |
| Max Load Resistance |
500 Ω |
| Analog Accuracy |
@ 20 mA = ±20 µA (with an ideal power supply) |
| Linearity |
0.15% |
| Settling Time |
32 ms (from min value to max value jump) |
| Reverse Polarity Protection |
Yes |
| Short Circuit Protection |
Yes |
| EMC: Emitted Interference |
DIN EN 61000-6-4 |
| EMC: Noise Immunity |
DIN EN 61000-6-2 |
| MTTF |
240.8 years @ 40 °C |
| Sensor |
|
| Technology |
Magnetic |
| Resolution Singleturn |
Programmable max. 13 bit, pre-programmed 13 bit |
| Resolution Multiturn |
Programmable max. 16 bit, pre-programmed 4 bit |
| Multiturn Technology |
Self powered magnetic pulse counter (no battery, no gear) |
| Accuracy (INL) |
±0.0878° (≤ 12 bit) |
| Sense Signal (Default) |
Counterclockwise shaft movement (front view on shaft) |
| Code |
Analog Current 4 – 20 mA |
| Cycle Time Base Sensor |
< 100 µs |
| Minimum Measurement Range |
0 – 11.25° |
| Resolution of Output |
Max. 13 bits over entire measureing range (Fractional Turns – Resolution decreases less than 13 bits when measurements range is less than 90 degrees) |
| Multiturn Range |
16 turn (default setting). User can use the UBIFAST Tool to measure up to 65536 turns. |
| Environmental Specifications |
|
| Protection Class (Shaft) |
IP65 |
| Protection Class (Housing) |
IP66/IP67 |
| Operating Temperature |
-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) – +80 °C (+176 °F) |
| Humidity |
98% RH, no condensation |
| Mechanical Data |
|
| Housing Material |
Steel |
| Housing Coating |
Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) |
| Flange Type |
Blind Hollow, ø 58 mm (H) |
| Flange Material |
Aluminum |
| Shaft Type |
Blind Hollow, Depth = 28 mm |
| Shaft Diameter |
ø 15 mm (0.59″) |
| Shaft Material |
Stainless Steel V2A (1.4305, 303) |
| Rotor Inertia |
≤ 30 gcm² [≤ 0.17 oz-in²] |
| Friction Torque |
≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed |
≤ 12000 1/min |
| Shock Resistance |
≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Permanent Shock Resistance |
≤ 10 g (half sine 16 ms, EN 60068-2-29) |
| Vibration Resistance |
≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
| Length |
71,2 mm (2.80″) |
| Weight |
470 g (1.04 lb) |
| Maximum Axial / Radial Misalignment |
Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm |
| Electrical Connection |
|
| Connection Orientation |
Radial |
| Connector |
Cable 2 m |
| Cable Length |
2 m [79″] |
| Wire Cross Section |
0.14 mm² / AWG 26 |
| Material / Type |
PVC |
| Cable Diameter |
6 mm (0.24 in) |
| Minimum Bend Radius |
46 mm (1.81″) fixed, 61 mm (2.4″) flexing |
| Product Life Cycle |
|
| Product Life Cycle |
New |
| Approval |
CE + cULus |
| Connection Plan |
|
| SIGNAL |
CABLE COLOR |
| Power Supply |
Red |
| GND |
Yellow |
| Analog Output |
Green |
| Set1/Direction |
Brown |
| Set2/Zero Set |
White |
| Shielding |
Shield |
Connector-View on Encoder
